This machine integrates servo compensation system and motion control system, optimized design, uses multiple sets of photoelectric sensors to detect the relative position of the backing paper, controls the speed of the servo motors on both sides of the surface paper, and compensates independently, so that the surface paper and the backing paper are synchronized and accurately pasted. combine. Adhering to the "people-oriented" design concept, the operation is simple, and the adjustment of the lamination synchronization system can be automatically completed just by entering the paper size.
High-speed lamination, the line speed can reach 150 m/min.
乐发Ⅱ2Feeder part
Equipped with high-speed dedicated four-suction and four-feed feeder head, the angle and height of paper pick-up nozzle and paper-feed nozzle can be adjusted. The inclination of the paper line can be adjusted to the left and right to ensure that the paper runs smoothly at high speed.
乐发Ⅱ2Bottom paper part
The servo motor control system is adopted, and the suction force can be adjusted to ensure smooth output of corrugated paper and cardboard and easy operation.
Clearance (pressure) adjustment part
The four groups of pressure of paper feeding, gluing, lamination and compounding can be adjusted individually by unilateral micro-motion, or the four groups of pressure can be adjusted up and down as a whole.
main drive part
Adopt imported double-sided tooth synchronous belt drive, equipped with special tensioning device, stable transmission and low noise.
乐发Ⅱ2pre-stack section
Pre-stack the next pile of tissue paper without stopping to improve efficiency. Funnel-type I-shaped pre-stack paper holder, convenient and quick.
gluing part
乐发Ⅱ2Adopt special anilox roller design, fine grinding to ensure uniform coating. The lower roller is cleaned with water roller.
乐发Ⅱ2Positioning (Fitting) Section
Multiple sets of photoelectric sensors are used to detect the relative position of the bottom paper, and the motors on both sides of the top paper are controlled to perform independent compensation actions, so that the top paper and the bottom paper are accurately attached.
乐发Ⅱ2Electrical parts
With the combination of human-machine interface and PLC, various information such as parameter setting, operation speed, fault detection, abnormal alarm and other information are displayed on the screen to ensure the stable and efficient operation of the whole machine.
Find more product information for Connectivity &
Networks in our Online Catalogue!
Mobile Site
